Grout Colorant
Restore or change the color of existing tile grout easily by applying grout colors to existing grout joints. Color enhancements can be used to place emphasis on the tile by making the grout lines almost invisible, add a complementary color or create contrast to highlight the pattern of the tile. Rejuvenate the appearance of an entire floor and create an exceptional finished look in a bathroom, kitchen or larger living space.
RELATED LINKS
Alato Midnight Chevron Glass Mosaic Wall Tile
Recycled Glass Round Pewter Gray Mosaic Wall and Floor Tile - 2 in.
Glass Grape Amalfi Mosaic Wall Tile
Claros Silver Mercer Athens Stone and Glass Mosaic Wall Tile
Glass Grape Blend Mosaic Wall Tile - 1 in.
Estallido Frost Glass Hex Wall Tile - 10 x 11 in.
Glass Periwinkle Amalfi Mosaic Wall Tile
Ibizia Glass Mosaic Wall Tile
Winter Morning Athens Glass Mosaic Wall Tile
Estallido Blue Mocha Glass Hex Wall Tile - 10 x 11 in.
Antique Mirror Bevel Glass Mosaic Wall Tile
Winter Morning Picket Glass Mosaic Wall Tile
Beachwalk Napier Glass Mosaic Wall Tile
Corralejo Glass Mosaic Wall Tile
Recycled Glass Round Clay Mosaic Wall and Floor Tile - 2 in.
Glass Light Blu Amalfi Mosaic Wall Tile
Marbella Glass Mosaic Wall Tile
Alato Beachwalk Chevron Glass Mosaic Wall Tile
Oceanside Picket Glass Mosaic Wall Tile
Foggy Morning Picket Glass Mosaic Wall Tile
Marvista Athens Glass Mosaic Wall Tile
Glass Iridescent Indigo Blend Mosaic Wall Tile - 1 in.
Grenada Glass Mosaic Tile - 0.5 x 0.5 in.
Refresh Your Grout with Grout Colorant
Grout colorant allows you to freshen, enhance or totally change the color of your grout. Grout colorant will often also act as a sealant, which means there is no need to buy a separate grout colorant sealer. A combination grout colorant and sealer will allow you to refresh and reinforce your grout in the same process, beautifying and strengthening it for many years.
Grout colorant can easily be applied at home. Follow these instructions to get started.
How to Apply Grout Colorant
Cleaning
Allow new grout to cure for at least 48 hours before applying the colorant. For old grout, deep clean it using a grout cleaner or a vinegar solution. Rinse thoroughly and let dry for 24 hours.
Lightly etch the grout with an acidic etching product to improve colorant adhesion. Rinse again and let dry completely.
Note: Using vinegar or acidic cleaners on polished natural stone can remove the polished finish and permanently affect the look of this tile.
Application
Always wear utility gloves when applying colorant and avoid skin contact. If contact occurs, wash the affected area with soap and water. Before applying the colorant to the full surface, test it in an inconspicuous spot.
Use a grout brush to scrub the joints clean, then rinse and dry completely. Colorant should always be applied to freshly cleaned grout.
Using a poly brush, apply the colorant to the grout joint using a back-and-forth motion to work it deeply into the surface. For the best results, apply a second coat of colorant after two to four hours.
Drying and Curing
Colorant will dry tack-free in about 30 minutes and will be ready for light foot traffic after two hours. The surface will be ready for normal foot traffic after 24 hours and heavy foot traffic after 72 hours. Avoid scrubbing the grout joints for 20 days to allow the colorant to fully cure.
We're Here to Help
Not sure whether to keep the same color or switch things up? You can schedule a free design consultation and our expert staff will help you decide what would work best for your grout.